The most important questions about 
opk E-Space

What is opk E-Space?

Created with Sketch.

opk E-Space is a magnet-based electric sliding door system. The doors are moved 
by magnetic fields, thus eliminating vulnerable components such as toothed belts or 
cable pulls.

For which application purpose and which door types can I use the fitting? 

Created with Sketch.

The opk E-Space is suitable for wooden or glass doors in high-quality interior design, 
for medical practices and the gastronomy. Ultimately everywhere where a fully 
automatic passageway can be created with a sliding door. The maximum weight of 
the door may be 100kg and must be at least 730mm wide. The maximum door leaf 
height is 3,000mm. The maximum track length is 3,400mm, so a maximum door 
width of 1,700mm can be used. 

For which types of installation can the opk E-Space be used?

Created with Sketch.

Basically the opk E-Space is a system for ceiling mounting. However, with our wall 
mounting angle from the opk Spaceship range, the system can also be easily 
mounted on the wall. The corresponding mounting material is included. For mounting 
in a wall bag, please contact us personally.  

Can I use a cover?

Created with Sketch.

Due to the magnetic technology we have no heat development on the running track, 
therefore a cover can be glued directly onto the running track, for example an 
aluminium light metal or a 5mm wooden cover.

Is the running track always black? 

Created with Sketch.

Yes, the running track is always delivered in black. 

Which screws do I use to mount the opk E-Space?

Created with Sketch.

As we usually have no insight into your substructure and are not informed about the 
static conditions, please contact your local specialist dealer for fixing materials. 
Please state the respective door weight and rail length as well as the nature of your 
substructure.  

Which articles do I have to order for an opk E-Space? 

Created with Sketch.

You need the basic set, i.e. the drive including all runners and a supplementary set of 
wood or glass. Depending on your requirements, you can also select the appropriate 
accessories to control the drive.  

Can the running tracks be cut? 

Created with Sketch.

Yes, there is a scale on the top of the running track for this purpose, it is important that both sides 
are always cut off equally. The basic dimensions of the individual running tracks are as follows: 

 1.400-2.000mm  
2.000-2.700mm 
2.700-3.400mm 


How is the opk E-Space connected? 

Created with Sketch.

Our opk E-Space is a low-energy drive. The fitting is delivered ready to plug in and 
can be put into operation immediately via plug and play.


How is the opk E-Space adjusted? 

Created with Sketch.

As soon as you connect the opk E-Space to the power supply, a learning drive takes 
place automatically, during which the drive determines the end positions of the door. 
Further settings can be made via the E-Space App, available in the App Store and 
Google PlayStore. There, the closing speed, the opening time and the auto-close 
function can be set. If a password is required, it will be 888888.


In what ways can the door be opened and closed? 

Created with Sketch.

In the basic setting, the door can be controlled by touch-to-open. This means that the
door receives an impulse from the user and then opens or closes. Alternatively, the
door can be controlled using our App, the Bluetooth remote control, our CleanSwitch
touchless pushbutton or the PrimeMotion B fanlight sensor. The push-button and
fanlight sensor are connected to the system in the track by cable. We do not accept 
any guarantee for third-party control systems.


Is there a permanently open function? 

Created with Sketch.

In the basic setting, the drive is set so that the doors close again after a set time. If 
you remove the tick set for "auto-lock" in the app, the door will only close again after 
a new impulse via the door, the switch or after detection of the radar detector.   


What happens in the event of a power failure?

Created with Sketch.

In the event of a power failure the doors can be moved manually without any 
problems, but the door does not open automatically in the event of a power failure. 
As soon as the drive is powered up again, the opk E-Space starts a new learning 
journey.   


Is the system lockable?

Created with Sketch.

Currently the system cannot be locked. In a manual lock solution, the drive would 
work against the mechanical lock and start a learning drive, which would lead to a 
malfunction. We are currently working on a lock solution that is compatible with our 
opk E-Space and hope to introduce it soon.   


What happens if an object or person is in the passageway when the door is 
closing? 

Created with Sketch.

The system is equipped with a collision protection system which causes the door to 
open again. As soon as the resistance reaches at least 5N (corresponds to approx. 
510g), the collision protection takes effect.  


What closing and opening speed can be set? 

Created with Sketch.

The maximum closing and opening speed is 0.26 m/s. The smallest adjustable speed 
is 0.065 m/s. 


Can I use a double-leaf system? 

Created with Sketch.

Yes, simply order two drives with the respective configuration wood or glass and our 
synchronisation cable from our accessories. After connecting the cable, the doors 
open and close synchronously, the direction of travel of the individual drives can be 
set using the app. Stacking is currently not possible. 

Is there a fixed glass profile?

Created with Sketch.

We do not yet offer a fixed glass profile. We recommend a U-profile provided by the 
customer and a facing provided by the customer.  

How can the factory settings be restored? 

Created with Sketch.

The system can be reset to factory settings in the settings in the APP. The password 
666666 is required for this. 

Which test certificates are available for the opk E-Space

Created with Sketch.

It goes without saying that our opk E-Space meets the most important standards and 
is tested according to SGS. 
The following test certificates are available for the opk E-Space: 

  • Low energy drive test according to DIN 16005 
  • SGS test according to EN1527:2013 with 400.000 cycles 
  • CE certification by TÜV Rheinland  

Any questions? We kindly support you: